Beam quality：Spot diameter less than 20μm, divergence Angle is only 1/4 of the semiconductor pumped laser, suitable for precision, fine work.
Low cost：The electric-optical conversion rate is up to 30%, and the power consumption of the whole machine is 600W.Using a laser diode as a pump source,Make it work for an average of 30,000 hours without failure.
Fast processing speed：Processing speed is 5-10 times of the traditional laser marking machine.
Cover a small area:It is convenient to adjust the position flexibly while working.
|
Power |
20W/30W/50W/80W/100W/200W |
|
Carving Depth |
≤0.5mm |
|
Carving Speed |
≤12000mm/s |
|
Min Width |
0.01mm |
|
Min Character |
0.4mm |
|
Repeated Accuracy |
0.002mm |
|
Repetition Frequency |
20-100KHz |
|
Voltage |
220+5%VAC/50Hz/5A |
|
Rated Power |
600W-1500W |
|
Cabinet Size |
66x51x147cm |
FLYING FIBER LASER MARKING MACHINE
Beam quality：Spot diameter less than 20μm, divergence Angle is only 1/4 of the semiconductor pumped laser, suitable for precision, fine work.
Low cost：The electric-optical conversion rate is up to 30%, and the power consumption of the whole machine is 600W.
Fast processing speed：Processing speed is 5-10 times of the traditional laser marking machine.
Cover a small area:It is convenient to adjust the position flexibly while working.
Low cost：The electric-optical conversion rate is up to 30%, and the power consumption of the whole machine is 600W.
Fast processing speed：Processing speed is 5-10 times of the traditional laser marking machine.
Cover a small area:It is convenient to adjust the position flexibly while working.
